Sustainable optimization of waste management network over extended planning time horizon

This study proposes a multiperiod mixed integer linear programming model for the management of a single municipal solid waste (MSW) treatment plant with sustainability as the objective. Discrete and continuous variables define the capacity selections for diverse MSW technologies, and the operation of the MSW network, respectively. The economic target is considered to maximize the net present value. The environmental impact is the minimization of a normalized environmental objective function (NEOF). The social target is the maximization of jobs. An interesting feature about the research work is the requirement of biodrying technologies for MSW moisture content control. Due to the conflicted nature among the sustainability components, a multiobjective optimization (MO) is carried out to find the Pareto optimal solutions. The MO results show that the Pareto optimal solutions vary around profit range of $4.9–8.5 billion, NEOF impact range of 3.2–3.6 units, and social benefit range of 2700–4828 jobs.     

Optimisation of the spark plasma sintering process for high volume fraction SiCp/Al composites by orthogonal experimental design

Based on orthogonal experimental design (OED), the effects of the sintering pressure, sintering temperature and holding time on the mechanical properties of 50 vol% silicon carbide particle (SiCp)/2024Al composites prepared by spark plasma sintering (SPS) were investigated. The sintering pressure had the greatest effect on the density and bending strength of the material among these three factors, followed by sintering temperature and holding time. The optimised process conditions for producing the 50 vol% SiCp/2024Al were sintering at 550 °C for 5 min under 40 MPa, which resulted in a composite material with a density of 99.7% and good interface bonding with a comparatively high bending strength of 766.65 MPa. This work provides a promising method to produce high volume fraction composites that can meet high strength requirements.     

Flow conditioning system for tri-sonic high pressure aerothermal testing

Blowdown testing offers a cost-effective experimental tool to replicate the aerothermal conditions in numerous high speed systems. The wind tunnel must replicate the inlet operating conditions, while the spatial and time dependent inlet flow conditions should be assessed carefully. This paper provides a design methodology and rules that ensure adequate flow conditioning in high inlet pressure wind tunnels suitable for subsonic and supersonic operation with mass-flow limits ranging from 1 kg/s to 25 kg/s, Reynolds numbers from 10³ (1/m) to 4x10⁷ (1/m), and Mach numbers from 0.01 up to 6. The quality of the proposed flow conditioning system was evaluated using stereo PIV measurements combined with hotwire, Pitot probe, and total flow temperature traverses.     

基于秩序与非秩序理论的文创产品卡通形象设计研究

目的 从秩序与非秩序理论出发,研究文创产品卡通形象的设计方法.方法 对秩序与非秩序理论的视觉机制和创制理论进行梳理,结合实例,阐述了其与文创产品卡通形象设计之间的联系,分析文创产品卡通形象中的秩序与非秩序的表现形式,提出基于秩序与非秩序理论文创产品卡通形象设计的主要原则,归纳出一套基于秩序与非秩序理论的文创产品卡通形象设计流程与方法,指导设计实践,并验证这些理论方法在设计实践中有效性与可行性.结论 通过对秩序与非秩序理论的研究,文创产品卡通形象设计时应注意提高辨识度、亲和力和便于衍生设计的原则.探索基于秩序与非秩序理论的设计流程与方法,按照界定主题、主体形象设计、主体形象拓展、衍生品应用四个环节开展整体方案设计,为文创产品卡通形象设计提供新的思路与方法.     

尽善尽美——儒家思想对中国设计的启示

经过几千年的发展和接受,儒家逐步确立了在中国主流意识形态中的“正典”地位。但应该承认,我们对于儒家的接受并不是不加批判全盘照搬的。在这两千多年的时间里,社会生活和意识形态领域所发生的重大变化我们不可能视而不见,而儒家思想恰恰有很大一部分是属于社会学科范畴之内的,在今天明显已经失去积极的意义(比如一些封建宗法),对此当然不能过分坚持,否定发展。因此,对于当今海外的“新儒家”的一些做法,可以欣赏他们对于中国传统文化的热忱,但必须承认那只是一部分知识分子的精英心态,从社会学的眼光看,的确过于保守,不利于文化的创造,特别是不能适应于现代艺术和设计的发展。本文希望区分出儒家思想中具有时代性和永恒性两个方面的内容,在对其已没有价值的社会伦理思想自觉进行发展的同时,对其永恒的东西进行一种当代的阐释。     

基于循证的寒地综合医院的人性化设计研究

鉴于众多国家正在普遍使用循证方式去量化体验指数和指导设计,我国也正开始逐步应用循证设计理论,尝试将研究参与到设计的前期循证和实验及使用后评价的工作中去,文中将处于北方寒冷地域的综合医院为研究对象,对其进行循证评价分析指导设计,通过参照用后评价指标,印证循证指导的人性化设计策略的有效性。     

大跨度机库钢桁架中的预应力钢绞线穿束施工技术

以成都天府国际机场国航基地工程(机务维修一期)101号维修机库大跨度边桁架中的预应力钢绞线施工为背景,针对预应力钢绞线超长、单束钢绞线数量多、钢绞线穿束时质量大、摩擦力大等难点,提出钢绞线设计分束优化、增加增强隔板、研发穿束牵引装置等方案,通过实施该方案,减小了穿管时的牵引力,大大降低了钢绞线穿管损伤风险,同时大幅节省了穿管措施费用。     

A novel profile with high efficiency for hydrogen-circulating Roots pumps used in FCVs

Low flow rate is one of the primary disadvantages of Roots pumps when they are applied in hydrogen fuel cell vehicles. A novel profile for Roots pumps was developed in this paper to increase the working volume and reduce the internal leakage. The available range of the design parameters of the Roots pump with the new profile was determined analytically, and an improvement in the working volume was validated. The flow dynamics inside the traditional and new pumps were investigated by experiments and numerical simulations. The analytical results indicated that the maximum area utilization of the new profile was approximately 10.4% higher than that of the traditional profile at the same lobe number. The numerical results demonstrated the superiority of the proposed profile in high flow rate and sealing. The tip concentric arcs of the new profile reduced the internal leakage via the radial gap. The characteristic of multipoint meshing within a certain range of rotational angles reduced the interlobe leakage.     

Design of disturbance observer based on adaptive-neural control for large-scale time-delay systems in the presence of actuator fault and unknown dead zone

This article presents an adaptive neural compensation scheme for a class of large-scale time delay nonlinear systems in the presence of unknown dead zone, external disturbances, and actuator faults. In this article, the quadratic Lyapunov–Krasovskii functionals are introduced to tackle the system delays. The unknown functions of the system are estimated by using radial basis function neural networks. Furthermore, a disturbance observer is developed to approximate the external disturbances. The proposed adaptive neural compensation control method is constructed by utilizing a backstepping technique. The boundedness of all the closed-loop signals is guaranteed via Lyapunov analysis and the tracking errors are proved to converge to a small neighborhood of the origin. Simulation results are provided to illustrate the effectiveness of the proposed control approach.